Omron ZW Series

ZW Series

Бесконтактный конфокальный датчик смещения на основе белого светодиода

Требования контроля качества, число визуальных инспекций и скорость производства постоянно растут. Для соответствия этим требованиям необходимо обеспечивать стабильные измерения движущихся изделий без снижения скорости производства. Использующий конфокальный принцип измерений датчик серии ZW отвечает этим требованиям для большинства типов материалов (стекло, металл, пластик и т. д.) и форм (круглый, плоский, неровный и т. д.).

Описание

ZW Series

Бесконтактный конфокальный датчик смещения на основе белого светодиода

Требования контроля качества, число визуальных инспекций и скорость производства постоянно растут. Для соответствия этим требованиям необходимо обеспечивать стабильные измерения движущихся изделий без снижения скорости производства. Использующий конфокальный принцип измерений датчик серии ZW отвечает этим требованиям для большинства типов материалов (стекло, металл, пластик и т. д.) и форм (круглый, плоский, неровный и т. д.).

 

Особенности

  • Диаметр измерительного луча варьируется от 190 мкм до 4 мкм, что улучшает возможности сканирования мельчайших профилей
  • Малый диаметр измерительного луча до 9 мкм улучшает возможность измерения мельчайших профилей
  • Постоянный диаметр луча во всём диапазоне измерения
  • Щупы с узким форм-фактором, изогнутые под углом 90⁰ – установка в любом месте
  • Время отклика 20 мкс – обеспечивает высокоскоростную выборку во время движения
  • Высокое разрешение 0,25 мкм позволяет измерять очень тонкие предметы или шероховатые поверхности
  • Линейность до ±0,3 мкм независимо от типа материала, в результате чего не требуется юстировка
  • Превосходная компенсация угла ±25⁰ позволяет измерять скругленные или наклонные поверхности
  • Простая интеграция управления оборудованием благодаря доступным DLL-файлам

информация для заказа

Ordering information

ZW-8000

Sensor Head

Appearance Type Measuring range Spot diameter Static resolution

Cable length Order code
Square-shaped straight 10±0.5 mm 4 µm dia. 0.25 µm 2 m ZW-S8010 2M
0.3 m ZW-S8010 0.3M
20±1 mm 7 µm dia. 2 m ZW-S8020 2M
0.3 m ZW-S8020 0.3M
30±2 mm 10 µm dia. 2 m ZW-S8030 2M
0.3 m ZW-S8030 0.3M
Pen-shaped straight 7±0.3 mm 7 µm dia. 2 m ZW-SP8007 2M
0.3 m ZW-SP8007 0.3M
10±0.7 mm 10 µm dia. 2 m ZW-SP8010 2M
0.3 m ZW-SP8010 0.3M
Pen-shaped right angle 7±0.3 mm 8 µm dia. 2 m ZW-SPR8007 2M
0.3 m ZW-SPR8007 0.3M
10±0.7 mm 11 µm dia. 2 m ZW-SPR8010 2M
0.3 m ZW-SPR8010 0.3M

Sensor Controller with EtherCAT

Appearance Power supply Output type Order code
24 VDC NPN/PNP ZW-8000T

Cable

Appearance Item Cable length Order code
Extension Fiber Cable (from Sensor Head to Sensor Controller), (Fiber Adapter ZW-XFCS is included)

Note:Extension Fiber Cable ZW-XF80⬜⬜R can be used with the firmware version 3.000 or later. If you have an old version Sensor Controller, register as a Sysmac member and download the latest firmware and tools to update your Sensor Controller. Refer to the Sysmac member registration sheet that is enclosed with the Sensor Controller for details on member registration and firmware download.

2 m ZW-XF8002R
5 m ZW-XF8005R
10 m ZW-XF8010R
20 m ZW-XF8020R
30 m ZW-XF8030R
Fiber Adapter
(used between Sensor Head pre-wired cable and Extension Fiber Cable)
ZW-XFCS

ZW-7000

Sensor Head

Appearance Type Measuring range Spot diameter Static resolution

Cable length Order code
Square-shaped straight 10±0.5 mm 50 µm dia. 0.25 µm 2 m ZW-S7010 2M
0.3 m ZW-S7010 0.3M
20±1 mm 70 µm dia. 2 m ZW-S7020 2M
0.3 m ZW-S7020 0.3M
30±2 mm 100 µm dia. 2 m ZW-S7030 2M
0.3 m ZW-S7030 0.3M
40±3 mm 120 µm dia. 2m ZW-S7040 2M
0.3m ZW-S7040 0.3M
Pen-shaped straight 7±0.3 mm 130 µm dia. 2 m ZW-SP7007 2M
0.3 m ZW-SP7007 0.3M
10±0.7 mm 170 µm dia. 2 m ZW-SP7010 2M
0.3 m ZW-SP7010 0.3M
Pen-shaped right angle 7±0.3 mm 150 µm dia. 2 m ZW-SPR7007 2M
0.3 m ZW-SPR7007 0.3M
10±0.7 mm 190 µm dia. 2 m ZW-SPR7010 2M
0.3 m ZW-SPR7010 0.3M

Sensor Controller with EtherCAT

Appearance Power supply Output type Order code
24 VDC NPN/PNP ZW-7000T

Cable

Appearance Item Cable length Order code
Extension Fiber Cable (from Sensor Head to Sensor Controller), (Fiber Adapter ZW-XFCM is included)

Note:Cables of 10, 20, and 30 m can be used with the firmware version 2.100 or later. If you have an old version Sensor Controller, register as a Sysmac member and download the latest firmware and tools to update your Sensor Controller. Refer to the Sysmac member registration sheet that is enclosed with the Sensor Controller for details on member registration and firmware download.

2 m ZW-XF7002R
5 m ZW-XF7005R
10 m ZW-XF7010R
20 m ZW-XF7020R
30 m ZW-XF7030R
Fiber Adapter
(used between Sensor Head pre-wired cable and Extension Fiber Cable)
ZW-XFCM

ZW-5000

Sensor Head

Appearance Type Measuring range Spot diameter Static resolution

Cable length Order code
Square-shaped straight 10±0.5 mm 9 µm dia. 0.25 µm 2 m ZW-S5010 2M
0.3 m ZW-S5010 0.3M
20±1 mm 13 µm dia. 2 m ZW-S5020 2M
0.3 m ZW-S5020 0.3M
30±2 mm 18 µm dia. 2 m ZW-S5030 2M
0.3 m ZW-S5030 0.3M
Pen-shaped straight 7±0.3 mm 13 µm dia. 2 m ZW-SP5007 2M
0.3 m ZW-SP5007 0.3M
10±0.7 mm 18 µm dia. 2 m ZW-SP5010 2M
0.3 m ZW-SP5010 0.3M
Pen-shaped right angle 7±0.3 mm 15 µm dia. 2 m ZW-SPR5007 2M
0.3 m ZW-SPR5007 0.3M
10±0.7 mm 20 µm dia. 2 m ZW-SPR5010 2M
0.3 m ZW-SPR5010 0.3M

Sensor Controller with EtherCAT

Appearance Power supply Output type Order code
24 VDC NPN/PNP ZW-5000T

Cable

Appearance Item Cable length Order code
Extension Fiber Cable (from Sensor Head to Sensor Controller), (Fiber Adapter ZW-XFC2 is included)

Note:Extension Fiber Cable ZW-XF50⬜⬜R can be used with the firmware version 2.100 or later. If you have an old version Sensor Controller, register as a Sysmac member and download the latest firmware and tools to update your Sensor Controller. Refer to the Sysmac member registration sheet that is enclosed with the Sensor Controller for details on member registration and firmware download.

2 m ZW-XF5002R
5 m ZW-XF5005R
10 m ZW-XF5010R
20 m ZW-XF5020R
30 m ZW-XF5030R
Fiber Adapter
(used between Sensor Head pre-wired cable and Extension Fiber Cable)
ZW-XFC2

Common cables

Appearance Item Cable length Order code
Parallel cable for ZW-8000T/7000T/5000T

32-pole (included with Sensor Controller ZW-8000T/7000T/5000T)

2 m ZW-XCP2E
RS-232C Cable for personal computer 2 m ZW-XRS2
RS-232C Cable for PLC/programmable terminal 2 m ZW-XPT2

Технические характеристики

Use Straight STP (shielded twisted-pair) cable of category 5 or higher with double shielding (braiding and aluminum foil tape) for EtherCAT.

Cable with Connectors

Item Appearance Recommended manufacturer Cable length(m)

Order code
Standard type

Cable with Connectors on Both Ends
(RJ45/RJ45)Wire Gauge and Number of Pairs:
AWG26, 4-pair CableCable Sheath material: LSZH

 

Cable color: Yellow

 

OMRON 0.3 XS6W-6LSZH8SS30CM-Y
0.5 XS6W-6LSZH8SS50CM-Y
1 XS6W-6LSZH8SS100CM-Y
2 XS6W-6LSZH8SS200CM-Y
3 XS6W-6LSZH8SS300CM-Y
5 XS6W-6LSZH8SS500CM-Y
Rugged type

Cable with Connectors on Both Ends
(RJ45/RJ45)Wire Gauge and Number of Pairs:
AWG22, 2-pair Cable

OMRON 0.3 XS5W-T421-AMD-K
0.5 XS5W-T421-BMD-K
1 XS5W-T421-CMD-K
2 XS5W-T421-DMD-K
5 XS5W-T421-GMD-K
10 XS5W-T421-JMD-K
Rugged type

Cable with Connectors on Both Ends
(M12 Straight/RJ45)Wire Gauge and Number of Pairs:
AWG22, 2-pair Cable

OMRON 0.3 XS5W-T421-AMC-K
0.5 XS5W-T421-BMC-K
1 XS5W-T421-CMC-K
2 XS5W-T421-DMC-K
5 XS5W-T421-GMC-K
10 XS5W-T421-JMC-K
Rugged type

Cable with Connectors on Both Ends
(M12 Right-angle/RJ45)Wire Gauge and Number of Pairs:
AWG22, 2-pair Cable

OMRON 0.3 XS5W-T422-AMC-K
0.5 XS5W-T422-BMC-K
1 XS5W-T422-CMC-K
2 XS5W-T422-DMC-K
5 XS5W-T422-GMC-K
10 XS5W-T422-JMC-K
Note:For details, refer to Cat.No.G019.

Cables/Connectors

Wire Gauge and Number of Pairs: AWG24, 4-pair Cable

Item Appearance Recommended manufacturer Order code
Cables Hitachi Metals, Ltd. NETSTAR-C5E SAB 0.5 × 4P CP

Kuramo Electric Co. KETH-SB

SWCC Showa Cable Systems Co. FAE-5004

RJ45 Connectors Panduit Corporation MPS588-C

Wire Gauge and Number of Pairs: AWG22, 2-pair Cable

Item Appearance Recommended manufacturer Order code
Cables Kuramo Electric Co. KETH-PSB-OMR

JMACS Japan Co.,Ltd. PNET/B

RJ45 Assembly Connector OMRON XS6G-T421-1

Note:Connect both ends of cable shielded wires to the connector hoods.

Industrial switching hubs for Ethernet

Appearance Number of ports Failure detection Current consumption Order code
3 None 0.22 A W4S1-03B
5 None 0.22 A W4S1-05B
Supported W4S1-05C
Note:Industrial switching hubs cannot be used for EtherCAT.

EtherCAT junction slaves

Appearance Number of ports Power supply voltage Current consumption Order code
3 20.4 to 28.8 VDC
(24 VDC -15 to 20%)
0.08A GX-JC03
6 0.17A GX-JC06
Note:

  1. Please do not connect EtherCAT junction slave with OMRON position control unit, Model CJ1W-NC⬜81/⬜82.
  2. EtherCAT junction slaves cannot be used for EtherNet/IPTM and Ethernet.

Automation Software Sysmac Studio

Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually.

Each model of licenses does not include DVD.

Item Specifications Number of licenses Media Standards Order code
Sysmac Studio

Standard Edition

Ver.1⬜⬜

 

The Sysmac Studio is the software that provides an integrated environment for setting, programming, debugging and maintenance of machine automation controllers including the NJ/NX-series CPU Units, NY-series Industrial PC, EtherCAT Slave, and the HMI.

Sysmac Studio runs on the following OS.

Windows 7 (32-bit/64-bit version)/Windows 8 (32-bit/64-bit version)/
Windows 8.1 (32-bit/64-bit version)/Windows 10 (32-bit/64-bit version)This software provides functions of the Measurement Sensor Edition. Refer to your OMRON website for details.


(Media only)
DVD SYSMAC-SE200D
1 license

SYSMAC-SE201L
Sysmac Studio

Measurement
Sensor EditionVer.1.⬜⬜

Sysmac Studio Measurement Sensor Edition is a limited license that provides selected functions required for ZW-series Displacement Sensor settings.

Because this product is a license only, you need the Sysmac Standard Edition DVD media to install it.

1 license SYSMAC-ME001L
3 license SYSMAC-ME003L

Fiber Cleaner

Item Recommended manufacturer Applicable Model Contacts Order code
ZW-8000 ZW-7000 ZW-5000
Fiber Connector Cleaner

OMRON Yes Yes Yes OMRON ZW-XCL
NEOCLEAN-M NTT Advanced
Technology Corporation
No Yes No ATC-NE-M1
OPTIPOP R1 Yes

(Sensor Head only)

No Yes

(Sensor Head only)

ATC-RE-01
  • Расчёт проекта





      Нажимая на кнопку Отправить, я даю согласие на обработку персональных данных.

    • Получить консультацию





        Нажимая на кнопку Отправить, я даю согласие на обработку персональных данных.

      • Узнать цены и сроки